Elite Roofing & Contracting Services in Maryland, Delaware, Pennsylvania, and Virginia
Elite Roofing & Contracting Services in Maryland, Delaware, Pennsylvania, and Virginia
A metal roof can be a long-term solution, but only when the system is designed and installed correctly for your roof. Maverick Contracting LLC provides metal roofing installation for homes and commercial buildings across approved areas of Maryland, Delaware, Virginia, and Pennsylvania.
Metal roofing is often a strong fit, but not for every roof or every budget. It tends to make the most sense when:
Metal costs more upfront than asphalt shingles, so the value usually shows over many years of ownership.
Straightforward roof shapes suit metal roofing panels well. Heavily cut-up roofs with many valleys and dormers add labor and flashing detail.
Some standing seam systems are rated for lower pitches than shingles, depending on the panel and the manufacturer's requirements.
Metal is widely used on warehouses, shops, barns, and other buildings where durability and drainage matter.
Replacement is a natural time to compare metal against another shingle roof.
If your budget, roof design, or HOA rules point toward a different material, we’ll say so. The goal is the right roof for your property, not a specific product.
Concealed-fastener panels with raised, interlocking seams for residential and commercial roofs.
Cost-conscious panel systems commonly used on outbuildings, agricultural buildings, and some homes.
Tear-off of your existing roof and installation of a complete metal system when you're ready to switch materials. See our roof replacement services for the full replacement process.
Installation and replacement on commercial buildings, with scheduling built around your operations.
Targeted fixes for loose fasteners, failed flashing, and damaged panels through our roof repair team.
Assessments of your deck, flashing, and existing roof so you know whether metal is the right next step.
A metal roof is a system, not just panels. Each component has a job, and correct installation of all of them is what keeps water out. Depending on the roof, a metal system may include:
The structural base under the roof. We check it for rot, soft spots, and damage before anything goes on top.
A synthetic underlayment rated for the heat that builds under metal panels.
A self-adhered membrane at eaves, valleys, and penetrations, where water and ice are most likely to get in.
Standing seam, corrugated, or other profiles, selected for your roof slope, building type, and goals.
Concealed clips on standing seam systems let panels expand and contract with temperature changes. Exposed-fastener systems use screws with sealing washers.
Eave, rake, valley, ridge, and wall flashing that seal the edges and transitions where leaks usually start.
Foam or vented closures that block wind-driven rain and pests while supporting attic airflow.
Panel profile, metal gauge, finish, and manufacturer are confirmed during your estimate. Ask us which manufacturer warranty options may apply to your roof.
Metal roofing rewards careful installation and exposes shortcuts. Maverick Contracting was founded by people who saw too many contractors putting profit before people and chose a better standard. For metal roofing, that means an honest assessment of whether metal fits your roof, a clear written scope, and installation that follows the manufacturer’s requirements.
Key Benefits
Maverick Contracting LLC did a wonderful job on my new kitchen. I am very pleased with the results and would highly recommend. They were very responsive, they listened to what I wanted, and helped me see a vision. The attention to detail is something that sets them apart from other contractors I looked into. They were reasonably priced. Overall wonderful experience and will definitely use them for future contracting needs.
Working with Kenneth from Maverick as our claim specialist in resolving our roof damage was very satisfactory. He provided transparency in pricing and the process of removal and replacement. The roofing team was professional and efficient in their work. We are satisfied customers.
The Maverick team were great to work with and very efficient for my new roof installs. Two weeks from quote to install and it would have been an even quicker turn around if I had been available for the first install date they gave me. Also, the install crew finish exactly in the time frame promised and did a fantastic job with clean up. Roof installs can be messy work so I really appreciate this.
Maverick Contracting LLC offers metal roofing installation for homes and commercial buildings across approved areas of Maryland, Delaware, Virginia, and Pennsylvania. Many roofing companies install shingles, but fewer specialize in metal. When comparing metal roofing contractors, ask about their metal-specific experience, their licensing in your state, the systems they install, and the written workmanship warranty they provide.
Many residential metal roofs are installed in several days to about a week once materials arrive. Timing depends on roof size, complexity, tear-off needs, deck repairs, and weather. Panels fabricated to length can add lead time before the start date. We provide a projected timeline with your estimate and keep you updated if conditions change.
Most homeowners can stay home during the project. Expect noise during tear-off and fastening, a dumpster and material delivery on or near your driveway, and crews on the property during working hours. We recommend securing loose items in the attic and keeping pets indoors and away from work areas. We review access, parking, and daily cleanup with you before work begins. For commercial properties, we plan work hours and access around your operations.
A correct installation starts with a sound deck and follows the panel manufacturer's instructions and local code. In general, that means:
Installed standing seam roofing in roughly the $9 to $20 per square foot range for steel and aluminum systems. Corrugated and other exposed-fastener panels generally cost less, around $7 to $12 per square foot in one 2026 breakdown, while copper and zinc cost more. Your cost depends on roof size, pitch, complexity, panel type, metal and gauge, tear-off, deck repairs, and access. These are not a Maverick quote. We provide a written estimate after inspecting the damage.
Most metal roofs go over a high-temperature synthetic underlayment, with a self-adhered leak barrier at eaves, valleys, and around penetrations. Standard asphalt felt can break down under the heat that builds beneath metal panels, so many manufacturers specify high-temperature products. Some systems also call for a slip sheet. The right combination depends on the panel system, roof slope, and the manufacturer's requirements, which we confirm during your estimate.
In some cases, local code and the panel manufacturer may allow metal over a single layer of shingles. We usually recommend tear-off because it lets us inspect and repair the deck, which is the foundation of the whole system. We'll explain the options and trade-offs after inspecting your roof.
Yes. We install commercial metal roofing on buildings such as retail spaces, offices, and warehouses. We plan phasing, work hours, access, and safety around your operations and provide documentation at closeout.
Give us the details and we will be in touch.
